麒麟系统，运行IEEE14模型，报下面的错误
14:10:34: 计算方案Win_DefaultTask详情:
14:10:34: 计算方案Win_DefaultTask详情:
14:10:44: 计算工作目录:'D:/Adpss/算例/电磁暂态算例/ieee14'
14:10:45: 收到一个子网的连接！
14:10:45: 计算启动！
14:10:46: Note:Large R in parallel at D1/D11/Y-Type side of 3-phase 2-Windings Transformer!
14:10:46: Info: P1：Simulation Configuration is successful
14:10:46: Info: P2.1:Element ReadIn is successful!
14:10:46: Info: P2.2:Element CheckPara is successful!
14:10:46: Info: P2.3:OutPutFile and BaseFile open successful!
14:10:46: Info: Init9: initNet is successful;
14:10:46: Info: Init11: This Simulation is running without UDM!
14:10:46: Info: P2: Both element and simulation initialization are successfully.
14:10:46: Info: Calc 1: The Program is Running...
14:10:46: Tips: Local Serial,dTfinal= 80.000000
14:10:48: Stopprogram start.
14:10:48: Info: P4.1: Stop Simulation by Stop Command
14:10:48: 计算终止！
14:11:05: 开始保存界面参数设置！
14:11:05: 保存界面参数设置完成！
14:11:06: 保存及生成分网，请稍等...
14:11:08: 启动自动分网程序!
14:11:08: 自动分网成功!
14:11:08: CPUAllocManage clear
14:11:08: 读取文件CPUAlloc.INF成功
14:11:08: CPUAllocManage clear
14:11:08: 读取文件CPUAlloc.INF成功
14:11:08: 读取文件D:/Adpss/算例/电磁暂态算例/1//PCIEAlloc.INF成功
14:11:08: 任务分配及分网完成，窗口关闭。
14:11:08: 计算方案1详情:分网方案：全网;全网:电磁暂态 优化;节点机选择：1;可优化最大子网数：1;
14:11:16: 开始检测节点机的FTP连接...
14:11:16: 测试节点机192.168.25.137的Ftp连接...成功！
14:11:16: 节点机Ftp连接正常
14:11:16: ssh c0101 rm -rf /home/adpss/case/ceshi/7/
14:11:18: ssh c0101 mkdir /home/adpss/tmp
14:11:20: ssh c0101 touch /home/adpss/tmp/41.mark
14:11:21: ssh c0101 chmod 777 -R /home/adpss/case/
14:11:25: 本地压缩文件开始
14:11:25: 本地压缩文件成功
14:11:27: 在服务端解压文件
14:11:28: 服务端解压文件成功
14:11:28: 任务递交成功完成!
14:11:29: 开始网络方案检查...
14:11:29: 网络方案检查结束
14:11:29: 启动后台计算程序，请稍等...
14:12:13: MPI环境测试通过!
14:12:13: 补丁环境测试通过!
14:12:13: 服务器连接成功
14:12:15: socket通信测试通过!
14:12:16: 后台连通性测试通过!
14:12:38: 超算登陆失败！
14:12:38: 收到一个子网的连接！
14:12:38: 收到一个子网的连接！
回答于：2025-10-22 14:51上海
You have an valid license file. The expired date is 2030-3-24!
ADPSS starts without CPUSETCORE().
You have an valid license file. The expired date is 2030-3-24!
g_ParInfo.iKsub = 1g_ParInfo.iMYID = 0
g_ParInfo.iKsub = -1g_ParInfo.iMYID = 1
(ProId:0)MPIComm_sharedmem has been established!
socketid is 0, shmcomm size is 2
(ProId:0)Step 4: Shared Memory allocation starts;
(ProId:1)Step 4: Shared Memory allocation starts;
(ProId:1)Warning：Can't find interface file *.ITF//
(ProId:0)Warning：Can't find interface file *.ITF//
(ProId:0)Step 5: Shared Memory Addresses are assigned;
(ProId:1)Step 5: Shared Memory Addresses are assigned;
(ProId:0)Info:P1.2 (shared Memory initial) finished;
(ProId:0)******Formcomm() begin******
(ProId:0)******Formcomm() begin waiting ******
(ProId:1)Info:P1.2 (shared Memory initial) finished;
(ProId:1)******Formcomm() begin******
(ProId:0)******Formcomm() end waiting ******
(ProId:0)Comm IO is created!
(ProId:0)Number of IO proc: